Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Thu Oct 18 22:41:48 PDT 2007
    root@obi-wan.spinnaker.com:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 1073606656 (1023 MB)
avail memory = 1036980224 (988 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <INSYDE RSDT_000> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6120e2906000e29
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link7: BIOS IRQ 11 for 0.29.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xc0000000-0xc3ffffff,0x90000000-0x97ffffff,0xc1000000-0xc1ffffff irq 11 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mskc0: <Marvell Yukon 88E8036 Gigabit Ethernet> port 0xa000-0xa0ff mem 0xbc000000-0xbc003fff irq 11 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x01> on mskc0
msk0: Ethernet address: 00:a0:d1:20:b1:b1
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> PHY 2 on miibus0
ukphy0:  10baseT
ukphy1: <Generic IEEE 802.3u media interface> PHY 3 on miibus0
ukphy1:  10baseT
ukphy2: <Generic IEEE 802.3u media interface> PHY 4 on miibus0
ukphy2:  10baseT
ukphy3: <Generic IEEE 802.3u media interface> PHY 5 on miibus0
ukphy3:  10baseT
ukphy4: <Generic IEEE 802.3u media interface> PHY 6 on miibus0
ukphy4:  10baseT
ukphy5: <Generic IEEE 802.3u media interface> PHY 7 on miibus0
ukphy5:  10baseT
mskc0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1200-0x121f irq 5 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1220-0x123f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1240-0x125f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1260-0x127f irq 11 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf4000000-0xf40003ff irq 5 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci_link6: BIOS IRQ 11 for 6.6.INTC is invalid
pci6: <ACPI PCI bus> on pcib4
iwi0: <Intel(R) PRO/Wireless 2915ABG> mem 0xb000b000-0xb000bfff irq 11 at device 4.0 on pci6
iwi0: Ethernet address: 00:12:f0:89:f6:4b
iwi0: [ITHREAD]
cbb0: <TI6411 PCI-CardBus Bridge> mem 0x13000000-0x13000fff at device 6.0 on pci6
cbb0: Could not map register memory
device_attach: cbb0 attach returned 12
fwohci0: <1394 Open Host Controller Interface> mem 0xb0000000-0xb00007ff,0xb0004000-0xb0007fff irq 9 at device 6.2 on pci6
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:0d:a0:d1:20:b1:b1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:08:0d:20:b1:b1
fwe0: Ethernet address: 02:08:0d:20:b1:b1
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:08:0d:a0:d1:20:b1:b1 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x13f8000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
pci6: <mass storage> at device 6.3 (no driver attached)
pci6: <base peripheral> at device 6.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0xe000-0xe0ff,0xe100-0xe13f mem 0xd0000000-0xd00001ff,0xd0000200-0xd00002ff irq 10 at device 30.2 on pci0
pcm0: [ITHREAD]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff,0x110-0x117 irq 3 drq 1 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xe0000-0xe1fff,0xe5000-0xe5fff,0xeb000-0xeffff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on uhub0
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1862010056 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 152627MB <Seagate ST9160821A 3.ALD> at ata0-master UDMA100
acd0: DVDR <MATSHITADVD-RAM UJ-831S/1.40> at ata1-master UDMA33
GEOM_LABEL: Label for provider ad0s1 is ntfs/WinXP.
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad0s3a
mskc0: Uncorrectable PCI Express error
msk0: link state changed to UP